Configuring MP through an MP-group interface
When you configure MP through an MP-group interface, follow these guidelines:
The ppp mp max-bind command and the ppp mp min-fragment command you configured can take effect on an MP bundle only after you re-enable all the physical interfaces in the MP bundle by executing the shutdown command and then the undo shutdown command.
After you configure the undo ppp mp fragment enable command on an interface, the settings configured with the ppp mp lfi and ppp mp min-fragment commands become invalid on the interface.
To configure MP through an MP-group interface:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Create an MP-group interface and enter its view. | interface mp-group mp-number | N/A |
3. Set the maximum number of links in an MP bundle. | ppp mp max-bind max-bind-num | Optional. The default setting is 16. |
4. Configure the MP sort buffer size factor. | ppp mp sort-buffer-size size | Optional. The default setting is 1. |
5. Enable MP fragmentation. | ppp mp fragment enable | Optional. By default, MP fragmentation is disabled. |
6. Set the minimum size of MP fragments. | ppp mp min-fragment size | Optional. The default setting is 128 bytes. |
7. Set the interface description. | description text | Optional. By default, the description of an MP-group interface is interface name Interface. |
8. Set the MTU size of the interface. | mtu size | 1500 bytes by default. |
9. Set the intended bandwidth for the MP-group interface. | bandwidth bandwidth-value | Optional. |
10. Restore the default settings for the MP-group interface. | default | Optional. |
11. Bring up the interface. | undo shutdown | Optional. By default, the interface is up. |
12. Return to system view. | quit | N/A |
13. Enter interface view. | interface interface-type interface-number | N/A |
14. Configure software support for MP binding. | ppp mp soft-binding | By default, MP binding is supported in hardware. Software support for MP binding can only be configured on CPOS interfaces. |
15. Add the interface to the MP-group and configure it to operate in MP mode. | ppp mp mp-group mp-number | N/A |