Configuration procedure
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter interface view. | interface interface-type interface-number | N/A |
3. Configure the synchronous/asynchronous interface to operate in asynchronous mode. | physical-mode async | Optional. You must configure this command for synchronous/asynchronous interfaces, but not for asynchronous interfaces. |
4. Configure the asynchronous interface to operate in protocol mode. | async mode protocol | Optional. Protocol mode by default. |
5. Enable SLIP encapsulation on the interface. | link-protocol slip | Optional. PPP by default. |