Configuration procedure

To configure MPLS CAR:

Step	Command	Remarks
1. Enter system view.	system-view	N/A
2. Enter interface view or port group view.	Enter interface view:interface interface-type interface-number Enter port group view:port-group manual port-group-name	Use one of the commands. Settings in interface view take effect on the current interface. Settings in port group view take effect on all ports in the port group.
3. Configure an MPLS CAR policy for the interface or port group.	qos car { inbound \| outbound } { any \| acl acl-number \| carl carl-index } cir committed-information-rate [ cbs committed-burst-size [ ebs excess-burst-size ] ] [ green action ] [ red action ]	N/A

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Enter interface view or port group view.

Enter interface view:interface interface-type interface-number
Enter port group view:port-group manual port-group-name

Use one of the commands.

Settings in interface view take effect on the current interface. Settings in port group view take effect on all ports in the port group.

3. Configure an MPLS CAR policy for the interface or port group.

qos car { inbound | outbound } { any | acl acl-number | carl carl-index } cir committed-information-rate [ cbs committed-burst-size [ ebs excess-burst-size ] ] [ green action ] [ red action ]

N/A

prev	up	next
Configuration prerequisites	home	Configuring MPLS priority marking