Configuration procedure
To configure FRTS:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter FR interface view. | interface interface-type interface-number | N/A |
3. Enable FRTS. | fr traffic-shaping | By default, FRTS is disabled. |
4. Return to system view. | quit | N/A |
5. Enter FR class view. | fr class class-name | N/A |
6. Set CBS for FR PVCs. | cbs [ outbound ] committed-burst-size | Optional. The default setting is 56000 bps. |
7. Set EBS for FR PVCs. | ebs [ outbound ] excess-burst-size | Optional. The default setting is 0 bit. |
8. Set CIR ALLOW for FR PVCs. | cir allow [ outbound ] committed-information-rate | Optional. The default setting is 56000 bps. |
9. Set CIR for FR PVCs. | cir committed-information-rate | Optional. The default setting is 56000 bps. |
10. Enable FRTS adaptation. | traffic-shaping adaptation { becn percentage | interface-congestion number } | Optional. By default, the command is enabled with the percentage argument being 25 for traffic with the BECN flag. |