Configuration procedure
![]() | CAUTION: To configure the qos wred enable command on an interface, make sure that WFQ queuing has been applied on the interface. | |
To configure WRED on an interface:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter interface view or PVC view. |
| N/A |
3. Enable WRED. | qos wred [ dscp | ip-precedence ] enable | N/A |
4. Set the WRED exponent for average queue size calculation. | qos wred weighting-constant exponent | Optional. The default setting is 9. |
5. Set the drop-related parameters for the precedence. | qos wred { ip-precedence ip-precedence | dscp dscp-value } low-limit low-limit high-limit high-limit discard-probability discard-prob | Optional. |