Configuration procedure
To configure QoS tokens:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter interface view. | interface interface-type interface-number | Applicable to only serial interfaces and BRI interfaces. |
3. Specify the number of QoS tokens. | qos qmtoken token-number | By default, the QoS token feature is disabled. |
4. Shut down the interface | shutdown | Re-enable the interface by using the shutdown command and then the undo shutdown command to make the QoS token feature take effect. |
5. Bring up the interface. | undo shutdown | N/A |