Configuration procedure
On an interface or PVC without WFQ configured, the qos wfq command can enable WFQ and configure WFQ-related parameters. If WFQ is configured for the interface or PVC, the qos wfq command can modify the WFQ-related parameters.
To configure WFQ:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter interface view or PVC view. |
| N/A |
3. Configure WFQ. | qos wfq [ dscp | precedence ] [ queue-length max-queue-length [ queue-number total-queue-number ] ] | By default, FIFO applies. |
4. Display interface/PVC WFQ configuration information. | display qos wfq interface [ interface-type interface-number [ pvc { pvc-name [ vpi/vci ] | vpi/vci } ] ] [ | { begin | exclude | include } regular-expression ] | Optional. Available in any view. |