Configuration procedure
To configure the FIFO queue size:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter interface view or PVC view. |
| N/A |
3. Configure the FIFO queue size. | qos fifo queue-length queue-length | The default FIFO queue size is 75. |
You must enable the rate limit function for the queuing function to take effect on these interfaces: tunnel interfaces, subinterfaces, HDLC link bundle interfaces, and VT/dialer interfaces configured with PPPoE, PPPoA, PPPoEoA, PPPoFR, or MPoFR (frame relay traffic shaping is not enabled on the frame relay interface).