Configuring the rate limit
The rate limit of a physical interface specifies the maximum rate of incoming packets or outgoing packets.
To configure the rate limit:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter interface view or port group view. |
| Use one of the commands. Settings in interface view take effect on the current interface. Settings in port group view take effect on all ports in the port group. |
3. Configure the rate limit for the interface or port group. | qos lr { inbound | outbound } cir committed-information-rate [ cbs committed-burst-size [ ebs excess-burst-size ] ] | N/A |