Configuring QoS policy-based traffic rate measuring interval for an interface
The QoS policy-based traffic rate measuring function collects per-class traffic statistics, including the average forwarding rate and drop rate over an interval. The measuring interval is user configurable and the statistics are refreshed every 15 seconds. You can use the display qos policy interface command to view the collected traffic rate statistics.
When you configure QoS policy-based traffic rate measuring interval for an interface, follow these guidelines:
The traffic rate measuring interval of an ATM PVC is the same as that configured on the ATM interface that carries it.
The traffic rate measuring interval of an FR DLCI is the same as that configured on the FR interface that carry it.
The traffic rate measuring interval of a subinterface is the same as that of the main interface.
To configure the QoS policy-based traffic rate measuring interval for an interface:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter interface view. | interface interface-type interface-number | N/A |
3. Configure the QoS policy-based traffic rate measuring interval for the interface. | qos flow-interval interval | The default setting is 5 minutes. |