Configuring a WLAN ACL
The following matrix shows the WLAN ACL and hardware compatibility:
Hardware | WLAN ACL |
|---|---|
MSR900 | Yes |
MSR93X | No |
MSR20-1X | Yes |
MSR20 | Yes |
MSR30 | Yes |
MSR50 | Yes (except MPU-G2) |
MSR1000 | Yes |
WLAN ACLs match packets from WLAN clients based on SSIDs of WLANs.
To configure a WLAN ACL:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Create a WLAN ACL and enter its view. | acl number acl-number | By default, no ACL exists. WLAN ACLs are numbered in the range of 100 to 199. |
3. Configure a description for the WLAN ACL. | description text | Optional. By default, a WLAN ACL has no ACL description. |
4. Set the rule numbering step. | step step-value | Optional. The default setting is 5. |
5. Create or edit a rule. | rule [ rule-id ] { deny | permit } [ ssid ssid-name ] | By default, a WLAN ACL does not include any rule. |
6. Add or edit a rule comment. | rule rule-id comment text | Optional. By default, no rule comments are configured. |
7. Add or edit a rule range remark. | rule [ rule-id ] remark text | Optional. By default, no rule range remarks are configured. |