Configuring IPv6 MPLS L3VPN carrier's carrier in the same AS
Network requirements
Configure carrier's carrier for the scenario shown in Figure 95. In this scenario:
PE 1 and PE 2 are the provider carrier's PE routers. They provide VPN services to the customer carrier.
CE 1 and CE 2 are the customer carrier's routers. They are connected to the provider carrier's backbone as CE routers.
PE 3 and PE 4 are the customer carrier's PE routers. They provide IPv6 MPLS L3VPN services to end customers.
CE 3 and CE 4 are customers of the customer carrier.
The customer carrier and the provider carrier reside in the same AS.
The key to the carrier's carrier deployment is to configure exchange of two kinds of routes:
Exchange of the customer carrier's internal routes on the provider carrier's backbone.
Exchange of the end customers' internal routes between PE 3 and PE 4, the PEs of the customer carrier. In this process, an MP-IBGP peer relationship must be established between PE 3 and PE 4.
Figure 95: Network diagram
Table 34: Interface and IP address assignment
Device | Interface | IP address | Device | Interface | IP address |
|---|---|---|---|---|---|
CE 3 | GE2/1/1 | 2001:1::1/96 | CE 4 | GE2/1/1 | 2001:2::1/96 |
PE 3 | Loop0 | 1.1.1.9/32 | PE 4 | Loop0 | 6.6.6.9/32 |
GE2/1/1 | 2001:1::2/96 | GE2/1/1 | 2001:2::2/96 | ||
POS2/1/1 | 10.1.1.1/24 | POS2/1/1 | 20.1.1.2/24 | ||
CE 1 | Loop0 | 2.2.2.9/32 | CE 2 | Loop0 | 5.5.5.9/32 |
POS2/1/0 | 10.1.1.2/24 | POS2/1/0 | 21.1.1.2/24 | ||
POS2/1/1 | 11.1.1.1/24 | POS2/1/1 | 20.1.1.1/24 | ||
PE 1 | Loop0 | 3.3.3.9/32 | PE 2 | Loop0 | 4.4.4.9/32 |
POS2/1/0 | 11.1.1.2/24 | POS2/1/0 | 30.1.1.2/24 | ||
POS2/1/1 | 30.1.1.1/24 | POS2/1/1 | 21.1.1.1/24 |
Configuration procedure
Configure MPLS L3VPN on the provider carrier backbone. Start IS-IS as the IGP, enable LDP on PE 1 and PE 2, and establish an MP-IBGP peer relationship between the PEs:
# Configure PE 1.
<PE1> system-view [PE1] interface loopback 0 [PE1-LoopBack0] ip address 3.3.3.9 32 [PE1-LoopBack0] quit [PE1] mpls lsr-id 3.3.3.9 [PE1] mpls ldp [PE1-ldp] quit [PE1] isis 1 [PE1-isis-1] network-entity 10.0000.0000.0000.0004.00 [PE1-isis-1] quit [PE1] interface loopback 0 [PE1-LoopBack0] isis enable 1 [PE1-LoopBack0] quit [PE1] interface pos 2/1/1 [PE1-POS2/1/1] ip address 30.1.1.1 24 [PE1-POS2/1/1] isis enable 1 [PE1-POS2/1/1] mpls enable [PE1-POS2/1/1] mpls ldp enable [PE1-POS2/1/1] mpls ldp transport-address interface [PE1-POS2/1/1] quit [PE1] bgp 100 [PE1-bgp-default] peer 4.4.4.9 as-number 100 [PE1-bgp-default] peer 4.4.4.9 connect-interface loopback 0 [PE1-bgp-default] address-family vpnv4 [PE1-bgp-default-vpnv4] peer 4.4.4.9 enable [PE1-bgp-default-vpnv4] quit [PE1-bgp-default] quit
# Configure PE 2 in the same way that PE 1 is configured. (Details not shown.)
# On PE 1 or PE 2, execute the following commands:
Execute the display mpls ldp peer command to verify that an LDP session in Operational state has been established between PE 1 and PE 2. (Details not shown.)
Execute the display bgp peer vpnv4 command to verify that a BGP peer relationship in Established state has been established between PE 1 and PE 2. (Details not shown.)
Execute the display isis peer command to verify that the IS-IS neighbor relationship has been established between PE 1 and PE 2. (Details not shown.)
Configure the customer carrier network. Start IS-IS as the IGP, and enable LDP between PE 3 and CE 1, and between PE 4 and CE 2:
# Configure PE 3.
<PE3> system-view [PE3] interface loopback 0 [PE3-LoopBack0] ip address 1.1.1.9 32 [PE3-LoopBack0] quit [PE3] mpls lsr-id 1.1.1.9 [PE3] mpls ldp [PE3-ldp] quit [PE3] isis 2 [PE3-isis-2] network-entity 10.0000.0000.0000.0001.00 [PE3-isis-2] quit [PE3] interface loopback 0 [PE3-LoopBack0] isis enable 2 [PE3-LoopBack0] quit [PE3] interface pos 2/1/1 [PE3-Pos2/1/1] ip address 10.1.1.1 24 [PE3-Pos2/1/1] isis enable 2 [PE3-Pos2/1/1] mpls enable [PE3-Pos2/1/1] mpls ldp enable [PE3-Pos2/1/1] mpls ldp transport-address interface [PE3-Pos2/1/1] quit
# Configure CE 1.
<CE1> system-view [CE1] interface loopback 0 [CE1-LoopBack0] ip address 2.2.2.9 32 [CE1-LoopBack0] quit [CE1] mpls lsr-id 2.2.2.9 [CE1] mpls ldp [CE1-ldp] quit [CE1] isis 2 [CE1-isis-2] network-entity 10.0000.0000.0000.0002.00 [CE1-isis-2] quit [CE1] interface loopback 0 [CE1-LoopBack0] isis enable 2 [CE1-LoopBack0] quit [CE1] interface pos 2/1/0 [CE1-Pos2/1/0] ip address 10.1.1.2 24 [CE1-Pos2/1/0] isis enable 2 [CE1-Pos2/1/0] mpls enable [CE1-Pos2/1/0] mpls ldp enable [CE1-Pos2/1/0] mpls ldp transport-address interface [CE1-Pos2/1/0] quit
PE 3 and CE 1 can establish an LDP session and IS-IS neighbor relationship between them.
# Configure PE 4 and CE 2 in the same way that PE 3 and CE 1 are configured. (Details not shown.)
Connect the customer carrier and the provider carrier:
# Configure PE 1.
[PE1] ip vpn-instance vpn1 [PE1-vpn-instance-vpn1] route-distinguisher 200:1 [PE1-vpn-instance-vpn1] vpn-target 1:1 [PE1-vpn-instance-vpn1] quit [PE1] mpls ldp [PE1-ldp] vpn-instance vpn1 [PE1-ldp-vpn-instance-vpn1] quit [PE1-ldp] quit [PE1] isis 2 vpn-instance vpn1 [PE1-isis-2] network-entity 10.0000.0000.0000.0003.00 [PE1-isis-2] address-family ipv4 [PE1-isis-2-ipv4] import-route bgp allow-ibgp [PE1-isis-2-ipv4] quit [PE1-isis-2] quit [PE1] interface pos 2/1/0 [PE1-Pos2/1/0] ip binding vpn-instance vpn1 [PE1-Pos2/1/0] ip address 11.1.1.2 24 [PE1-Pos2/1/0] isis enable 2 [PE1-Pos2/1/0] mpls enable [PE1-Pos2/1/0] mpls ldp enable [PE1-Pos2/1/0] mpls ldp transport-address interface [PE1-Pos2/1/0] quit [PE1] bgp 100 [PE1-bgp-default] ip vpn-instance vpn1 [PE1-bgp-default-vpn1] address-family ipv4 unicast [PE1-bgp-default-ipv4-vpn1] import isis 2 [PE1-bgp-default-ipv4-vpn1] quit [PE1-bgp-default-vpn1] quit [PE1-bgp-default] quit
# Configure CE 1.
[CE1] interface pos 2/1/1 [CE1-Pos2/1/1] ip address 11.1.1.1 24 [CE1-Pos2/1/1] isis enable 2 [CE1-Pos2/1/1] mpls enable [CE1-Pos2/1/1] mpls ldp enable [CE1-Pos2/1/1] mpls ldp transport-address interface [CE1-Pos2/1/1] quit
PE 1 and CE 1 can establish an LDP session and IS-IS neighbor relationship between them.
# Configure PE 2 and CE 2 in the same way that PE 1 and CE 1 are configured. (Details not shown.)
Connect end customers and the customer carrier:
# Configure CE 3.
<CE3> system-view [CE3] interface gigabitethernet 2/1/1 [CE3-GigabitEthernet2/1/1] ipv6 address 2001:1::1 96 [CE3-GigabitEthernet2/1/1] quit [CE3] bgp 65410 [CE3-bgp-default] peer 2001:1::2 as-number 100 [CE3-bgp-default] address-family ipv6 [CE3-bgp-default-ipv6] peer 2001:1::2 enable [CE3-bgp-default-ipv6] import-route direct [CE3-bgp-default-ipv6] quit [CE3-bgp-default] quit
# Configure PE 3.
[PE3] ip vpn-instance vpn1 [PE3-vpn-instance-vpn1] route-distinguisher 100:1 [PE3-vpn-instance-vpn1] vpn-target 1:1 [PE3-vpn-instance-vpn1] quit [PE3] interface gigabitethernet 2/1/1 [PE3-GigabitEthernet2/1/1] ip binding vpn-instance vpn1 [PE3-GigabitEthernet2/1/1] ipv6 address 2001:1::2 96 [PE3-GigabitEthernet2/1/1] quit [PE3] bgp 100 [PE3-bgp-default] ip vpn-instance vpn1 [PE3-bgp-default-vpn1] peer 2001:1::1 as-number 65410 [PE3-bgp-default-vpn1] address-family ipv6 unicast [PE3-bgp-default-ipv6-vpn1] peer 2001:1::1 enable [PE3-bgp-default-ipv6-vpn1] quit [PE3-bgp-default-vpn1] quit [PE3-bgp-default] quit
# Configure PE 4 and CE 4 in the same way that PE 3 and CE 3 are configured. (Details not shown.)
Configure an MP-IBGP peer relationship between the PEs of the customer carrier to exchange the VPN routes of the end customers:
# Configure PE 3.
[PE3] bgp 100 [PE3-bgp-default] peer 6.6.6.9 as-number 100 [PE3-bgp-default] peer 6.6.6.9 connect-interface loopback 0 [PE3-bgp-default] address-family vpnv6 [PE3-bgp-default-af-vpnv6] peer 6.6.6.9 enable [PE3-bgp-default-af-vpnv6] quit [PE3-bgp-default] quit
# Configure PE 4 in the same way that PE 3 is configured. (Details not shown.)
Verifying the configuration
Display the public network routing table and VPN routing table on the provider carrier PEs, for example, on PE 1:
# Verify that the public network routing table contains only routes of the provider carrier network.
[PE1] display ip routing-table Destinations : 14 Routes : 14 Destination/Mask Proto Pre Cost NextHop Interface 0.0.0.0/32 Direct 0 0 127.0.0.1 InLoop0 3.3.3.9/32 Direct 0 0 127.0.0.1 InLoop0 4.4.4.9/32 IS_L1 15 10 30.1.1.2 POS2/1/1 30.1.1.0/24 Direct 0 0 30.1.1.1 POS2/1/1 30.1.1.0/32 Direct 0 0 30.1.1.1 POS2/1/1 30.1.1.1/32 Direct 0 0 127.0.0.1 InLoop0 30.1.1.255/32 Direct 0 0 30.1.1.1 POS2/1/1 127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0 127.0.0.0/32 Direct 0 0 127.0.0.1 InLoop0 127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0 127.255.255.255/32 Direct 0 0 127.0.0.1 InLoop0 224.0.0.0/4 Direct 0 0 0.0.0.0 NULL0 224.0.0.0/24 Direct 0 0 0.0.0.0 NULL0 255.255.255.255/32 Direct 0 0 127.0.0.1 InLoop0
# Verify that the VPN routing table contains the internal routes of the customer carrier network.
[PE1] display ip routing-table vpn-instance vpn1 Destinations : 18 Routes : 18 Destination/Mask Proto Pre Cost NextHop Interface 0.0.0.0/32 Direct 0 0 127.0.0.1 InLoop0 1.1.1.9/32 IS_L1 15 20 11.1.1.1 POS2/1/0 2.2.2.9/32 IS_L1 15 10 11.1.1.1 POS2/1/0 5.5.5.9/32 BGP 255 10 4.4.4.9 POS2/1/1 6.6.6.9/32 BGP 255 20 4.4.4.9 POS2/1/1 10.1.1.0/24 IS_L1 15 20 11.1.1.1 POS2/1/0 11.1.1.0/24 Direct 0 0 11.1.1.2 POS2/1/0 11.1.1.0/32 Direct 0 0 11.1.1.2 POS2/1/0 11.1.1.2/32 Direct 0 0 127.0.0.1 InLoop0 11.1.1.255/32 Direct 0 0 11.1.1.2 POS2/1/0 20.1.1.0/24 BGP 255 20 4.4.4.9 POS2/1/1 127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0 127.0.0.0/32 Direct 0 0 127.0.0.1 InLoop0 127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0 127.255.255.255/32 Direct 0 0 127.0.0.1 InLoop0 224.0.0.0/4 Direct 0 0 0.0.0.0 NULL0 224.0.0.0/24 Direct 0 0 0.0.0.0 NULL0 255.255.255.255/32 Direct 0 0 127.0.0.1 InLoop0
Display the routing table on the customer carrier CEs, for example, on CE 1:
# Verify that the routing table contains the internal routes of the customer carrier network.
[CE1] display ip routing-table Destinations : 21 Routes : 21 Destination/Mask Proto Pre Cost NextHop Interface 0.0.0.0/32 Direct 0 0 127.0.0.1 InLoop0 1.1.1.9/32 IS_L1 15 10 10.1.1.1 POS2/1/0 2.2.2.9/32 Direct 0 0 127.0.0.1 InLoop0 5.5.5.9/32 IS_L2 15 74 11.1.1.2 POS2/1/1 6.6.6.9/32 IS_L2 15 74 11.1.1.2 POS2/1/1 10.1.1.0/24 Direct 0 0 10.1.1.2 POS2/1/0 10.1.1.0/32 Direct 0 0 10.1.1.2 POS2/1/0 10.1.1.2/32 Direct 0 0 127.0.0.1 InLoop0 10.1.1.255/32 Direct 0 0 10.1.1.2 POS2/1/0 11.1.1.0/24 Direct 0 0 11.1.1.1 POS2/1/1 11.1.1.0/32 Direct 0 0 11.1.1.1 POS2/1/1 11.1.1.1/32 Direct 0 0 127.0.0.1 InLoop0 11.1.1.255/32 Direct 0 0 11.1.1.1 POS2/1/1 20.1.1.0/24 IS_L2 15 74 11.1.1.2 POS2/1/1 127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0 127.0.0.0/32 Direct 0 0 127.0.0.1 InLoop0 127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0 127.255.255.255/32 Direct 0 0 127.0.0.1 InLoop0 224.0.0.0/4 Direct 0 0 0.0.0.0 NULL0 224.0.0.0/24 Direct 0 0 0.0.0.0 NULL0 255.255.255.255/32 Direct 0 0 127.0.0.1 InLoop0
Display the public network routing table and VPN routing table on the customer carrier PEs, for example, on PE 3:
# Verify that the public network routing table contains the internal routes of the customer carrier network.
[PE3] display ip routing-table Destinations : 18 Routes : 18 Destination/Mask Proto Pre Cost NextHop Interface 0.0.0.0/32 Direct 0 0 127.0.0.1 InLoop0 1.1.1.9/32 Direct 0 0 127.0.0.1 InLoop0 2.2.2.9/32 IS_L1 15 10 10.1.1.2 POS2/1/1 5.5.5.9/32 IS_L2 15 84 10.1.1.2 POS2/1/1 6.6.6.9/32 IS_L2 15 84 10.1.1.2 POS2/1/1 10.1.1.0/24 Direct 0 0 10.1.1.1 POS2/1/1 10.1.1.0/32 Direct 0 0 10.1.1.1 POS2/1/1 10.1.1.1/32 Direct 0 0 127.0.0.1 InLoop0 10.1.1.255/32 Direct 0 0 10.1.1.1 POS2/1/1 11.1.1.0/24 IS_L1 15 20 10.1.1.2 POS2/1/1 20.1.1.0/24 IS_L2 15 84 10.1.1.2 POS2/1/1 127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0 127.0.0.0/32 Direct 0 0 127.0.0.1 InLoop0 127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0 127.255.255.255/32 Direct 0 0 127.0.0.1 InLoop0 224.0.0.0/4 Direct 0 0 0.0.0.0 NULL0 224.0.0.0/24 Direct 0 0 0.0.0.0 NULL0 255.255.255.255/32 Direct 0 0 127.0.0.1 InLoop0
# Verify that the VPN routing table has the remote VPN route.
[PE3] display ipv6 routing-table vpn-instance vpn1 Destinations : 6 Routes : 6 Destination: ::1/128 Protocol : Direct NextHop : ::1 Preference: 0 Interface : InLoop0 Cost : 0 Destination: 2001:1::/96 Protocol : Direct NextHop : :: Preference: 0 Interface : GE2/1/1 Cost : 0 Destination: 2001:1::2/128 Protocol : Direct NextHop : ::1 Preference: 0 Interface : InLoop0 Cost : 0 Destination: 2001:2::/96 Protocol : BGP4+ NextHop : ::FFFF:6.6.6.9 Preference: 255 Interface : POS2/1/1 Cost : 0 Destination: FE80::/10 Protocol : Direct NextHop : :: Preference: 0 Interface : InLoop0 Cost : 0 Destination: FF00::/8 Protocol : Direct NextHop : :: Preference: 0 Interface : NULL0 Cost : 0
Verify that PE 3 and PE 4 can ping each other. (Details not shown.)
Verify that CE 3 and CE 4 can ping each other. (Details not shown.)