Configuring auto-dial
With auto-dial enabled, DDR automatically dials a connection to the remote end upon router startup without requiring a triggering packet. If the connection cannot be established, it will retry at the auto-dial interval. The established connection does not disconnect due to the idle-timeout timer expiration as it would in packet-triggered DDR.
To configure auto-dial:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter dialup interface view. | interface dialer number | N/A |
3. Set the auto-dial interval. | dialer timer autodial autodial-interval | The default setting is 300 seconds. |