Configuring bundle DDR
To configure a dialer interface to place calls, enable DDR.
At the initiator end, the system selects a dialer interface according to the dialer-group rule command configuration.
The initiator end can optionally authenticate the receiving end. To authenticate the receiving end, configure PAP or CHAP authentication on the dialer interface.
To configure bundle DDR:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Create a dialer interface and enter its view. | interface dialer number | N/A |
3. Enable bundle DDR on the interface. | dialer bundle enable | By default, bundle DDR is disabled. |