Configuring Frame Relay IPHC on a virtual circuit
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter interface view. | interface interface-type interface-number | The interface can be a main interface or a subinterface. |
3. Create a virtual circuit on the interface. | fr dlci dlci-number | By default, no virtual circuits exist on an interface. |
4. Enable Frame Relay IPHC. | fr compression iphc enable [ nonstandard ] | By default, Frame Relay IPHC is disabled. If you specify the nonstandard keyword, only RTP header compression is supported, and TCP header compression is not supported. |
5. Set the maximum number of RTP header-compression connections allowed. | fr compression iphc rtp-connections | The default setting is 16. |
6. Set the maximum number of TCP header-compression connections allowed. | fr compression iphc tcp-connections | The default setting is 16. |