Configuring static address-to-DLCI maps

1. Enter system view.

system-view

N/A

2. Enter interface view.

interface interface-type interface-number

The interface can be a main interface or P2MP subinterface.

3. Create a static Frame Relay address-to-DLCI map.

• Create an IPv4 address-to-DLCI map:fr map ip { ip-address | default } dlci-number

• Create an IPv6 address-to-DLCI map:fr map ipv6 { ipv6-address | default } dlci-number

By default, no static Frame Relay address-to-DLCI maps exist.

When the DLCI specified in this command does not exist, the DLCI is automatically created.

If you configure an IPv6 address-to-DLCI map, as a best practice, also configure an address-to-DLCI map for the link-local address of the peer. This ensures that packets with the link-local address as the destination address can be forwarded.