Configuration procedure
To configure a local Frame Relay virtual circuit:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter interface view. | interface interface-type interface-number | The interface can be a main interface or subinterface. |
3. Create a virtual circuit on the interface. | fr dlci dlci-number | By default, no virtual circuits exist. |
4. (Optional.) Configure the encapsulation type for the virtual circuit. | fr encapsulation { ietf | nonstandard } | By default, a virtual circuit uses the encapsulation type configured on its interface. |
5. (Optional.) Allow broadcast packets on the virtual circuit. | broadcast | By default, broadcast packets are forbidden on static virtual circuits and allowed on dynamic virtual circuits. When a virtual circuit allows broadcast packets, the broadcast or multicast packets on the Frame Relay interface of the virtual circuit are also transmitted on the virtual circuit. |