Configuring subnet-leased users

You can configure multiple subnet-leased users on an interface. Different subnets must have the same mask length. Each subnet can be bound to only one subnet-leased user.

To configure subnet-leased users:

Step	Command	Remarks
1. Enter system view.	system-view	N/A
2. Enter interface view.	interface interface-type interface-number	This feature supports the following interfaces: Layer 3 Ethernet interface and subinterface. Layer 3 aggregate interface and subinterface. L3VE interface and subinterface.
3. Configure subnet-leased users.	Configure an IPv4 subnet-leased user: ip subscriber subnet-leased ip ip-address { mask \| mask-length } username name password { ciphertext \| plaintext } string [ domain domain-name ] Configure an IPv6 subnet-leased user: ipv6 subscriber subnet-leased ipv6 ipv6-address prefix-length username name password { ciphertext \| plaintext } string [ domain domain-name ]	By default, no subnet-leased user is configured.

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Enter interface view.

interface interface-type interface-number

This feature supports the following interfaces:

Layer 3 Ethernet interface and subinterface.
Layer 3 aggregate interface and subinterface.
L3VE interface and subinterface.

3. Configure subnet-leased users.

Configure an IPv4 subnet-leased user:
ip subscriber subnet-leased ip ip-address { mask | mask-length } username name password { ciphertext | plaintext } string [ domain domain-name ]
Configure an IPv6 subnet-leased user:
ipv6 subscriber subnet-leased ipv6 ipv6-address prefix-length username name password { ciphertext | plaintext } string [ domain domain-name ]

By default, no subnet-leased user is configured.

prev	up	next
Configuring interface-leased users	home	Configuring ISP domains for leased users