Configuration example for NAS-initiated L2TP tunnel

As shown in Figure 33, a PPP user is connected to an LNS through an LAC.

Set up an L2TP tunnel between the LAC and LNS to allow the PPP user to access the corporate network.

Configuration procedure

1. Configure the LAC:

   # Configure IP addresses for the interfaces. (Details not shown.)

   # Create a local user named vpdnuser, set the password, and enable the PPP service.

   <LAC> system-view
   [LAC] local-user vpdnuser class network
   [LAC-luser-network-vpdnuser] password simple Hello
   [LAC-luser-network-vpdnuser] service-type ppp
   [LAC-luser-network-vpdnuser] quit
   

   # Configure local authentication for PPP users in ISP domain system.

   [LAC] domain system
   [LAC-isp-system] authentication ppp local
   [LAC-isp-system] quit
   

   # Create Virtual-Template 1 and specify its PPP authentication mode as CHAP.

   [LNS] interface virtual-template 1
   [LNS-virtual-template1] ppp authentication-mode chap domain system
   [LNS-virtual-template1] quit
   

   # Enable the PPPoE server on GigabitEthernet 2/1/0 and bind the interface to Virtual-Template 1.

   [LAC] interface gigabitethernet 2/1/0
   [LAC-GigabitEthernet2/1/0] pppoe-server bind virtual-template 1
   [LAC-GigabitEthernet2/1/0] quit
   

   # Enable L2TP.

   [LAC] l2tp enable
   

   # Create L2TP group 1 in LAC mode.

   [LAC] l2tp-group 1 mode lac
   

   # Configure the local tunnel name as LAC.

   [LAC-l2tp1] tunnel name LAC
   

   # Specify PPP user vpdnuser as the condition for the LAC to initiate tunneling requests.

   [LAC-l2tp1] user fullusername vpdnuser 
   

   # Specify the LNS IP address as 1.1.2.2.

   [LAC-l2tp1] lns-ip 1.1.2.2
   

   # Enable tunnel authentication, and specify the tunnel authentication key as aabbcc.

   [LAC-l2tp1] tunnel authentication
   [LAC-l2tp1] tunnel password simple aabbcc
   [LAC-l2tp1] quit
   

2. Configure the LNS:

   # Configure IP addresses for the interfaces. (Details not shown.)

   # Create a local user named vpdnuser, set the password, and enable the PPP service.

   <LNS> system-view
   [LNS] local-user vpdnuser class network
   [LNS-luser-network-vpdnuser] password simple Hello
   [LNS-luser-network-vpdnuser] service-type ppp
   [LNS-luser-network-vpdnuser] quit
   

   # Configure local authentication for PPP users in ISP domain system.

   [LNS] domain system
   [LNS-isp-system] authentication ppp local
   [LNS-isp-system] quit
   

   # Enable L2TP.

   [LNS] l2tp enable
   

   # Create a PPP address pool.

   [LNS] ip pool aaa 192.168.0.10 192.168.0.20
   [LNS] ip pool aaa gateway 192.168.0.1
   

   # Create Virtual-Template 1, specify its PPP authentication mode as CHAP, and use address pool aaa to assign IP addresses to the PPP users.

   [LNS] interface virtual-template 1
   [LNS-virtual-template1] ppp authentication-mode chap domain system
   [LNS-virtual-template1] remote address pool aaa
   [LNS-virtual-template1] quit
   

   # Create L2TP group 1 in LNS mode.

   [LNS] l2tp-group 1 mode lns
   

   # Configure the local tunnel name as LNS.

   [LNS-l2tp1] tunnel name LNS
   

   # Specify Virtual-Template 1 for receiving calls from an LAC.

   [LNS-l2tp1] allow l2tp virtual-template 1 remote LAC
   

   # Enable tunnel authentication, and specify the tunnel authentication key as aabbcc.

   [LNS-l2tp1] tunnel authentication
   [LNS-l2tp1] tunnel password simple aabbcc
   [LNS-l2tp1] quit
   

3. On the remote system, enter vpdnuser as the username and Hello as the password in the dial-up network window to dial a connection.

After the dial-up connection is established, the remote system can obtain an IP address and can ping the private IP address of the LNS.

# On the LNS, use the display l2tp tunnel command to check the established L2TP tunnels.

[LNS] display l2tp tunnel
LocalTID RemoteTID State         Sessions RemoteAddress    RemotePort RemoteName 
196      3542      Established   1        1.1.2.1          1701       LAC

# On the LNS, use the display l2tp session command to check the established L2TP sessions.

[LNS] display l2tp session
LocalSID      RemoteSID      LocalTID      State
2041          64             196           Established