Configuring IMSI/SN binding authentication
Perform this task on the LNS to initiate IMSI/SN binding authentication.
You must configure this feature on the LNS in either of the following conditions:
A 3G or 4G router acts as a client and accesses the LNS in client-initiated mode.
A 4G router acts as an LAC and is automatically triggered to access the LNS in LAC-auto-initiated mode.
To configure IMSI/SN binding authentication:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter VT interface view. | interface virtual-template interface-number | N/A |
3. Configure IMSI/SN binding authentication information. |
| Use one of the methods. By default, the LNS does not initiate IMSI/SN binding authentication requests.. By default, no separator is configured for the received authentication information |
4. (Optional.) Replace the client username with the IMSI or SN information for authentication. | ppp user replace { imsi | sn } | By default, the client username is used for authentication. |