Configuring an LAC to initiate tunneling requests for a user
This task configures an LAC to initiate tunneling requests to an LNS for a user. When the PPP user information matches the specified user, the LAC determines that the PPP user is an L2TP user and initiates tunneling requests to the LNS.
You can specify a user by configuring one of the following items:
Fully qualified name—The LAC initiates tunneling requests to the LNS only if the username of a PPP user matches the configured fully qualified name.
Domain name—The LAC initiates tunneling requests to the LNS only if the ISP domain name of a PPP user matches the configured domain name.
To configure an LAC to initiate tunneling requests for a user:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter L2TP group view in LAC mode. | l2tp-group group-number [ mode lac ] | N/A |
3. Configure the LAC to initiate tunneling requests for a user. | user { domain domain-name | fullusername user-name } | By default, an LAC does not initiate tunneling requests for any users. |