Identification of 4x4 part numbers
A SKU# (also called a Product Number or Part Number) may be fulfilled by two or more vendor parts providing similar functionality. A 4x4 part number is of the form nnnn-nnnn and is printed on the transceiver, DAC, or AOC label. For example, JL309A can have a 1990-4680 or 1990-4678 4x4 part number.
4x4 part numbers are referenced in the:
specification tables, to identify parts that support DOM (Digital Optical Monitoring) capabilities. (Some older vendor parts do not support DOM.)
compatibility tables, where necessary, to identify supported combinations of switch or module with the identified transceiver, along with the minimum software version required.
In December 2017, Aruba introduced Revision D (and, in 2019, a Rev E 10G LR optic) versions of 100M, 1G, and 10G products. Revision D products are structured to be specific alternative vendors as sources for the SKU#. Earlier Revision A, B, or C product may have alternative vendors that Aruba no longer actively ships, but remains as fully supported in specific switches.
Some switch products will specify Revision D (and, in some cases, Rev E 10G LR optic) transceivers for full support, while other products may support earlier (older) revision transceivers – and some with specific 4x4 part numbers.
To cross-reference the Transceiver/DAC product against the switch product to identify the minimum software required for transceiver support, always refer to the Datasheet or QuickSpecs for the switch product to see the current list of supported transceivers. Refer to the compatibility tables within this document .
To use CLI commands to display data for an installed transceiver, see the following examples.
switch# show int 1/10/6 transceiver ------------------------------------------------------------ Port Type Product Serial Part Number Number Number ------------------------------------------------------------ 1/10/6 QSFP+SR4 JH231A XX57nnnnnn 1990-5555
switch# show int 1/10/6 dom ------------------------------------------------------------------------------------------- Port Type Channel# Temperature Voltage Tx Bias Rx Power Tx Power (Celsius) (Volts) (mA) (mW/dBm) (mW/dBm) ------------------------------------------------------------------------------------------- 1/10/6 QSFP+SR4 1 26.00 3.32 6.72 0.02, -16.99 0.58, -2.37 2 26.00 3.32 6.79 0.02, -16.99 0.59, -2.29 3 26.00 3.32 6.68 0.03, -15.23 0.59, -2.29 4 26.00 3.32 6.82 0.03, -15.23 0.60, -2.22
switch# show interfaces transceiver f2 detail Transceiver in F2 Interface Index : 162 Type : QSFP+SR4 Model : JH231A Connector Type : MPO Wavelength : 850nm Transfer Distance : 100m (50um OM3), 150m (50um OM4) Diagnostic Support : DOM Serial Number : XX57nnnnnn Status Temperature : 33.332C Voltage : 3.3208V Tx Bias Rx Power Tx Power Channel# (mA) (mW/dbM) (mW/dbM) --------- -------- -------------- -------------- 1 6.904 0.5622, -2.501 0.5822, -2.349 2 6.706 0.5922, -2.275 0.5856, -2.324 3 6.894 0.6321, -1.992 0.5813, -2.356 4 6.792 0.5111, -2.915 0.5651, -2.479 Current Alarms: Channel 1 : Tx bias low alarm Rx power low warning Channel 2 : Tx bias low alarm Rx power low warning Current Errors: Channel 1 : Rx Loss of Signal Channel 2 : Rx Loss of Signal Channel 3 : Rx Loss of Signal Channel 4 : Rx Loss of Signal