Models, specifications, and compatibility
Gigabit SFP optical transceiver modules use LC connectors.
The specifications for Revision D transceiver products are the same as the specified Revision A, B, and C SKUs. Where support for a Revision A, B, or C transceiver existed, Revision D parts are also supported.
Product name (SKU) | DOM - Digital Optical Monitoring (4x4 part #) | Central wl (nm) | Fiber mode | Fiber diameter (µm) | Modal bandwidth (MHz*km) | Transmission distance |
---|---|---|---|---|---|---|
HPE X121 1G SFP LC SX Transceiver (J4858C)
Aruba 1G SFP LC SX 500m MMF XCVR (J4858D) |
Yes
(1990-4395 & 1990-4415) |
850 | MMF | 50/125 | 500 (OM2)
400 |
550 m (1804.46 ft)
500 m (1640.42 ft) |
62.5/125 | 200 (OM1)
160 |
275 m (902.23 ft)
220 m (721.78 ft) |
||||
HPE X121 1G SFP LC LX Transceiver (J4859C)
Aruba 1G SFP LC LX 10km SMF XCVR (J4859D) |
Yes
(1990-4116, 1990-4414, & 1990-4608) |
1310 | SMF | 9/125 | N/A | 10 km (6.21 miles) |
MMF | 50/125 | 500 or 400 | 550 m (1804.46 ft) | |||
MMF | 62.5/125 | 500 | 550 m (1804.46 ft) | |||
HPE X121 1G SFP LC LH Transceiver (J4860C)
Aruba 1G SFP LC LH 70km SMF XCVR (J4860D) |
Yes
(1990-4363) |
1550 | SMF | 9/125 | N/A | 70 km (43.49 miles) |
Product name (SKU) | Optical parameters (dBm) | |
---|---|---|
Transmit power | Receive power | |
HPE X121 1G SFP LC SX Transceiver (J4858C)
Aruba 1G SFP LC SX 500m MMF XCVR (J4858D) |
–9.5 to 0 | –17 to –3 |
HPE X121 1G SFP LC LX Transceiver (J4859C)
Aruba 1G SFP LC LX 10km SMF XCVR (J4859D) |
–9.5 to –3 | –20 to –3 |
HPE X121 1G SFP LC LH Transceiver (J4860C)
Aruba 1G SFP LC LH 70km SMF XCVR (J4860D) |
0 to +5 | –22 to –3 |
Product name | SKU | Minimum software required (J4858C/J4858D, J4859C/J4859D, J4860C/J4860D) | Comments |
---|---|---|---|
1400 Switch Series | J9078A | All | |
1410 Switch Series | J9561A | All | |
1700 Switch Series | J9080A | VB.01.09 | |
1800 Switch Series | J9028A/B | PB.02.09 | |
1810 Switch Series | J9450A, J9660A | J4858C/J4858D: All
J4859C/J4859D: All |
Gig LH (J4850C/J4860D) is supported only in the J9450A model. |
J9801A, J9803A, J9834A | J4858C/J4858D: All
J4859C/J4859D: All |
Gig LH (J4860C/J4860D) is not supported. | |
1820 Switch Series | J9980A, J9981A, J9983A, J9984A | J4858C/J4858D: All
J4859C/J4859D: All J4860C/J4860D: Not supported |
Gig LH (J4860C/J4860D) is not supported on the 1820 series. |
1850 Switch Series | JL169A | J4858C/JL4858D: All
J4859C/J4859D: All J4860C/J4860D: Not supported |
Gig LH (J4860C/J4860D) is not supported on the 1850 series. Other 1850 models not listed do not have SFP ports. |
1920S | JL381A, JL382A, JL384A, JL385A, JL386A | J4858C/J4858D: All
J4859C/J4859D: All J4860C/J4860D: Not supported |
Gig LH (J4860C/J4860D) is not supported on the 1920S series.
Models JL380A and JL383A do not include SFP ports. |
2510 Switch Series | J9019A/B, J9020A, J9279A, J9280A | All | |
2520 Switch Series | J9137A, J9138A, J9298A, J9299A | All | |
2530 Switch Series | J9772A, J9773A, J9774A, J9775A, J9776A, J9777A, J9778A, J9779A, J9780A, J9781A, J9782A, J9783A, J9853A, J9854A, J9855A, J9856A | All | |
2540 Switch Series | JL354A, JL355A, JL356A, JL357A | All | |
2600 Switch Series | J4899A/B/C, J4900A/B/C, J8164A, J8165A, J8762A | H.08.98 | |
2610 Switch Series | J9085A, J9086A, J9087A, J9088A, J9089A | All | |
2615-8-PoE Switch | J9565A | All | |
2620 Switch Series | J9623A, J9624A, J9625A, J9626A, J9627A | All | |
2800 Switch Series | J4903A, J4904A | i.08.103 | |
2810 Switch Series | J9021A, J9022A | All | |
2900 Switch Series | J9049A, J9050A | T.13.45 | |
2910al Switch Series | J9145A, J9146A, J9147A, J9148A | All | For use in the SFP ports on the models listed, and in the J9008A 2-port 10GbE SFP+ al module. |
2915-8G-PoE Switch | J9562A | All | |
2920 Series Switches | J9726A, J9727A, J9728A, J9729A, J9836A | All | For use in the SFP ports on the models listed. Also for use in the dual-speed SFP+ ports of the J9731A 2-Port 10GbE SFP+ Module. |
2930F Series Switches | JL253A, JL254A, JL255A, JL256A, JL258A, JL259A, JL260A, JL261A, JL262A, JL263A, JL264A, JL557A, JL558A, JL559A | All | |
2930M Switch Series | JL319A, JL320A, JL321A, JL322A, JL323A, JL324A | All | For use in SFP ports on switch and an installed JL083A Aruba 3810M/2930M 4SFP+ MACsec Module. |
3400cl Switch Series | J4905A, J4906A | All | |
3500 Series Switches | J9470A, J9471A, J9472A, J9473A | K.14.31 | |
3500yl Switch Series | J8692A, J8693A | All | For use in the SFP ports on the models listed, and in an installed J9312A 10GbE 2-port SFP+/2-port CX4 yl Model |
J9310A, J9311A | K.14.50 | ||
3800 Switch Series | J9573A, J9574A, J9575A, J9576A, J9584A | All | |
3810M Switch Series | JL071A, JL072A, JL073A, JL074A, JL076A, JL075A | All | For use in the JL075A 3810M switch. Also for use in any 3810M switch with a JL083A Aruba 3810M/2930M 4SFP+ MACsec Module installed. |
4200gl Switch Series | J4893A, J4908A | G.07.103 | |
4200vl Switch Series | J8776A, J9033A | All | |
5300xl Switch Series | J4878A/B, J4907A | E.10.36 | |
5400zl Switch Series | J8705A, J8706A | All | |
J9308A | K.14.34 | ||
J9537A, J9549A, J9535A, J9637A, J9538A, J9548A, J9536A | K.15.02.0004 | The J9309A 4-port SFP+ module only supports 10G transceivers.
The J9538A 8-port SFP+ v2 module supports both 1G and 10G transceivers. The J9538A 8-port SFP+ v2 module supports both 1G and 10G transceivers. |
|
5400R Switch Series | J9537A, J9549A, J9535A, J9637A, J9538A, J9548A, J9536A | All | The J9309A 4-port SFP+ module only supports 10G transceivers.
The J9538A 8-port SFP+ v2 module supports both 1G and 10G transceivers. |
J9988A, J9989A, J9990A, J9993A | KB.15.17 | ||
6108 Switch | J4902A | H.07.88 | |
6120 Switch Series | 498358-B21, 516733-B21 | SX, LX: all versions LH: not supported | |
6200yl-24G-mGBIC Switch | J8992A | All | |
Aruba 6200 Switch Series | All models | 10.04.1000 | Only the following 4x4 part numbers are supported: J4858C/J4858D:
J4859C/J4859D:
J4860C/J4860D:
|
Aruba 6300 Switch Series | All models | 10.04.0001 | |
Aruba 6400 Modules | R0X39B, R0X40B
R0X41A, R0X42A,R0X43A |
10.04.1000 | R0X39A/R0X40A (revision A) are no longer supported for use in the 6400 series. Only the following 4x4 part numbers are supported: J4858C/J4858D:
J4859C/J4859D:
J4860C/J4860D:
|
R0X44A | 10.04.2000 | ||
6600 Switch Series | J9263A, J9264A | K.14.03 | |
J9451A | K.14.24 | ||
8100fl Switch | J8735A | All | |
8200zl Switch Series | J8705A, J8706A | All | |
J9308A | K.14.34 | ||
J9537A, J9549A, J9535A, J9637A, J9538A, J9548A, J9536A | K.15.02.0004 | The J9309A 4-port SFP+ module only supports 10G transceivers
The J9538A 8-port SFP+ v2 module supports both 1G and 10G transceivers. |
|
Aruba 8320 48p 10G SFP/SFP+ and 6p 40G QSFP+ Switch | JL479A | All | Only the following 4x4 part numbers are supported: J4858C/J4858D:
J4859C/J4859D:
J4860C/J4860D:
|
Aruba 8325 Switch Series | JL624A, JL625A | 10.03.0010 | Only the following 4x4 part numbers are supported: J4858C/J4858D:
J4859C/J4859D:
J4860C/J4860D:
The 8325 requires configuration of "interface groups" (groups of 12 ports) to enable use of 1G or 10G transceivers or DACs in the SFP28 ports (default is to use 25G transceivers / DACs). See the Installation Guide for details. 1G optics at the opposite end of the link must NOT enable auto-negotiation and operate in full duplex mode. |
Aruba 8400X Modules | JL363A
JL687A |
10.00.0018
10.04.2000 |
Only the following 4x4 part numbers are supported: J4858C/J4858D:
J4859C/J4859D:
J4860C/J4860D:
JL687A 32p 25G module requires configuration of "interface groups" (groups of 4 ports) to enable use of 1G or 10G transceivers or DACs in the SFP28 ports (default is to use 25G transceivers / DACs). See the Installation Guide for details. JL687A: 1G optics at the opposite end of the link must NOT enable auto-negotiation and operate in full duplex mode (does not apply to the JL363A module) |
9300m Switch Series | J4885A, J4894A | All | |
9408sl Switch | J8684A | All |