Models, specifications, and compatibility
SFP+ optical transceiver modules provide a transmission rate of 10.31 Gbps and use LC connectors.
The specifications for Revision D and E transceiver products are the same as the specified Revision A, B, C SKUs. Where support for a Revision A, B, or C transceiver existed, Revision D or E parts are also supported.
Product Name (SKU) | DOM - Digital Optical Monitoring (4x4 part #) | Central wl (nm) | Fiber mode | Fiber diameter (µm) | Bandwidth (MHz*km) | Transmission distance |
---|---|---|---|---|---|---|
HPE X132 10G SFP+ LC SR Transceiver (J9150A)
Aruba 10G SFP+ LC SR 300m MMF XCVR (J9150D) |
Yes
(1990-4391, 1990-4175, 1990-4635, 1990-4634) |
850 | MMF | 50/125 | 4700 (OM4)
2000 (OM3) 500 (OM2) 400 |
400 m (1312.34 ft)
300 m (984.25 ft) 82 m (269.03 ft) 66 m (216.54 ft) |
62.5/125 |
200 (OM1) 160 |
33 m (108.27 ft) 26 m (85.30 ft) |
||||
HPE X132 10G SFP+ LC LRM Transceiver (J9152A)
Aruba 10G SFP+ LC LRM 220m MMF XCVR (J9152D) |
Yes
(1990-4485) See note below regarding MCP. |
1310 | MMF | 50/125 | 1500
500 (OM2) 400 |
220 m (721.78 ft)
220 m (721.78 ft) 100 m (328.08 ft) |
62.5/125 | 200 (OM1)
160 |
220 m (721.78 ft)
220 m (721.78 ft) |
||||
SMF | 9/125 | N/A | 300m (987.25 ft) | |||
HPE X132 10G SFP+ LC LR Transceiver (J9151A)
Aruba 10G SFP+ LC LR 10km SMF XCVR (J9151D and J9151E) |
Yes
(1990-4657, 1990-4694) |
1310 | SMF | 9/125 | N/A | 10 km (6.21 miles) |
HPE X132 10G SFP+ LC ER Transceiver (J9153A)
Aruba 10G SFP+ LC ER 40km SMF XCVR (J9153D) |
Yes
(1990-4365, 1990-4656) |
1550 | SMF | 9/125 | N/A | 40 km (24.86 miles) |
J9152D 10G LRM (Long Reach Multimode) with 4x4 1990-4485 is tuned so that it does not require a Mode Conditioning Patch (MCP) cable. Older J9152A with 4x4 numbers other than 1990-4485 may require an MCP when you use OM1 or OM2 fiber cables. Never use mode conditioning patch cables for OM3 or OM4 fiber types. For more information about mode conditioning patch cables, see related sections in the IEEE 802.3 standard.
Product name (SKU) | Optical parameters (dBm) | |
---|---|---|
Transmit power | Receive power | |
HPE X132 10G SFP+ LC SR Transceiver (J9150A)
Aruba 10G SFP+ LC SR 300m MMF XCVR (J9150D) |
–7.3 to –1 | –9.9 to +0.5 |
HPE X132 10G SFP+ LC LRM Transceiver (J9152A)
Aruba 10G SFP+ LC LRM 220m MMF XCVR (J9152D) |
–6.5 to +0.5 | –6.5 to +1.5 |
HPE X132 10G SFP+ LC LR Transceiver (J9151A)
Aruba 10G SFP+ LC LR 10km SMF XCVR (J9151D/J9151E) |
–8.2 to +0.5 | –14.4 to +0.5 |
HPE X132 10G SFP+ LC ER Transceiver (J9153A)
Aruba 10G SFP+ LC ER 40km SMF XCVR (J9153D) |
–4.7 to +4 | –15.8 to –1 |
Product name | SKU | Minimum software required | Comments | |
---|---|---|---|---|
10G-SR, LR, LRM (J9150A/J9150D, J9151A/J9151D/J9151E, J9152A/J9152D) | 10G-ER (J9153A/J9153D) | |||
1850 Switch Series | JL169A | J9150A/J9150D: All
J9151A/J9151D: All J9152A/J9152D: All |
J9153A/J9153D is not supported on the 1850 Switch Series. | Unlisted models do not have SFP+ ports. |
2530 Switch Series | J9853A, J9854A, J9855A, J9856A | All | All | Unlisted models do not have SFP+ ports. |
2540 Switch Series | JL354A, JL355A, JL356A, JL357A | All (J9150A/J9150D and J9151A/J9151D only)
J9152A/J9152D (LRM) is not supported in any 2540 model |
All | J9152A/J9152D (LRM) is not supported in any 2540 model. |
2910al Switch Series | J9008A | All | W.15.07.0002 | Unlisted models do not have SFP+ ports. |
2920 Switch Series | J9726A, J9727A, J9728A, J9729A, J9836A | All | For use in an installed J9731A Aruba 2920 2-port 10GbE SFP+ Module. | |
2930F Switch Series | JL253A, JL254A, JL255A, JL256A, JL258A, JL263A, JL264A, JL558A, JL559A | All (J9150A/J9150D and J9151A/J9151D/J9151E only)
J9152A/J9152D (LRM) is not supported in any 2930F model |
All | Unlisted models do not have SFP+ ports.
J9152A/J9152D (or any type of 10G LRM technology) is not supported in any 2930F model. |
2930M Switch Series | JL319A, JL320A, JL321A, JL322A, JL323A, JL324A | All | All | For use in an installed JL083A Aruba 3810M/2930M 4SFP+ MACsec Module. |
R0M67A, R0M68A | WC.16.05 | WC.16.05 | ||
3500yl Switch Series | J8692A, J8693A, J9310A, J9311A | K.14.50 and later | K.15.02.0004 and later | For use in an installed J9312A 10GbE 2-port SFP+/2-port CX4 yl Module. |
3800 Switch Series | J9575A, J9576A, J9573A, J9574A, J9584A | All | All | Unlisted models do not have SFP+ ports. |
3810M Switch Series | JL071A, JL072A, JL073A, JL074A, JL076A | All | All | For use in an installed JL083A Aruba 3810M/2930M 4SFP+ MACsec Module |
JL075A | All | All | For use in the JL075A SFP+ ports or in an installed JL083A Aruba 3810M/2930M 4SFP+ MACsec Module | |
5400zl Switch Series | J9309A | K.14.39 | K.15.02.0004 | The J9309A 4-port SFP+ module supports only 10G transceivers.
10G ER (J9153A/D) transceivers are limited to a maximum of two transceivers per J9309A or J9538A modules when used in a 5400zl or 8200zl chassis. |
J9538A, J9548A, J9536A | K.15.02.0004 | K.15.02.0004 | ||
5400R Switch Series | J9538A, J9548A, J9536A | All | All | |
J9990A, J9993A | KB.15.17 | KB.15.17 | ||
6120 Switch Series | 516733-B21 (6120XG) | All | Not supported | 498358-B21 (6120G/XG) has 1GB SFP and 10G XFP or CX4 ports and does not support these SFP+ transceivers. |
6200yl Switch Series | J8992A | K.14.50 | K.15.02.0004 | J8992A fixed SFP ports are 1GB and do not support these SFP+ transceivers.
For use in an installed J9312A 10GbE 2-port SFP+/2-port CX4 yl Module. |
Aruba 6200 Switch Series | All models | 10.04.1000
J9152A/J9152D (or any type of 10G LRM technology) is not supported in the 6200 Series |
10.04.1000
Only the listed 4x4 parts are fully supported J9153A/J9153D
|
J9152A/J9152D (or any type of 10G LRM technology) is not supported on the 6200 Series
Only the listed 4x4 parts are fully supported J9150A/J9150D
J9151A/J9151D
J9151E
J9152A/J9152D: Not Supported |
Aruba 6300 Switch Series | All models (M and F) | 10.04.0001
J9152A/J9152D (or any type of 10G LRM technology) is not supported in the 6300 Modules |
10.04.0001
J9153A/J9153D
|
J9152A/J9152D (or any type of 10G LRM technology) is not supported in the 6300 series
J9150A/J9150D
J9151A/J9151D
J9151E
J9152A/J9152D: Not Supported |
Aruba 6400 Modules | R0X39B, R0X40B
R0X41A, R0X42A, R0X43A |
10.04.1000 | 10.04.1000 | R0X38A/R0X39A/R0X40A (revision A) are no longer supported for use in the 6400 modules.
J9152A/J9152D (or any type of 10G LRM technology) is not supported in any of the 6400 modules J9150A/J9150D
J9151A/J9151D
J9152A/J9152D: Not Supported J9151E
|
R0X44A | 10.04.2000
J9152A/J9152D (or any type of 10G LRM technology) is not supported in any of the 6400 Modules |
10.04.2000
J9153A/J9153D
|
||
6600 Switch Series | J9264A, J9265A | K.14.03 | K.15.02.0004 | |
J9452A | K.14.24 | K.15.02.0004 | ||
8200zl Switch Series | J9309A | K.14.39 | K.15.02.0004 | The J9309A four-port SFP+ module only supports 10G transceivers. |
J9538A, J9548A, J9536A | K.15.02.0004 | K.15.02.0004 | 10G ER (J9153A/D) transceivers are limited to a maximum of two transceivers per J9309A or J9538A modules when used in a 5400zl or 8200zl chassis. | |
Aruba 8320 48p 10G SFP/SFP+ and 6p 40G QSFP+ Switch | JL479A | All (J9150A/J9150D and J9151A/J9151D only)
J9152A/J9152D (or any type of 10G LRM technology) is not supported in the 8320 JL479A |
All | Only the listed 4x4 parts are fully supported J9150A/J9150D
J9151A/J9151D
J9152A/J9152D (or any type of 10G LRM technology) is not supported on the 8320 Series J9151E
|
Aruba 8325 48Y8C Switch | JL624A, JL625A | 10.03.0030
J9152A/J9152D (or any type of 10G LRM technology) is not supported in any of the 8325 switches |
10.03.0030
Only the listed 4x4 parts are fully supported J9153A/J9153D
|
Only the listed 4x4 parts are fully supported
J9150A/J9150D
8325 is only compatible with J9151E or later. Do not attempt to use J9151D or earlier. J9151E
J9152A/J9152D (or any type of 10G LRM technology) is not supported in the 8325 switches. The 8325 requires configuration of "interface groups" (groups of 12 ports) to enable the use of 1G or 10G transceivers / DACs in the SFP28 ports (default is to use 25G transceivers / DACs). See the Installation Guide for details. |
Aruba 8400X modules | JL363A
JL687A |
All
10.04.2000 J9152A/J9152D (or any type of 10G LRM technology) is not supported in the JL687A module. |
JL363A: All
JL687A: 10.04.2000 |
Only the listed 4x4 parts are fully supported J9150A/J9150D
J9151E
JL363A module: supports J9152A/J9152D • 1990-4485 JL687A module does NOT support J9152A/J9152D (or any 10G LRM technology) The JL687A module requires configuration of "interface groups" (groups of 4 ports) to enable the use of 1G or 10G transceivers / DACs in the SFP28 ports (default is to use 25G transceivers / DACs). See the Installation Guide for details. |
J9152D 10G LRM with 4x4 1990-4485 is tuned so that it does not require the use of a mode conditioning patch (MCP) cable. Older J9152A with 4x4 #s other than 1990-4485 may require an MCP when you use OM1 or OM2 fiber cables. Never use mode conditioning patch cables for OM3 or OM4 fiber types. For more information about mode conditioning patch cables, see related parts in the IEEE 802.3 standard.