Models, specifications, and compatibility
Product name (SKU) | Transmission distance | Data rate | Cable type | Connector type |
---|---|---|---|---|
Aruba 10GBASE-T SFP+ RJ45 30m Cat6A XCVR (JL563A) | 30 m (98.43 ft) | 10G | STP Cat6A 1 | RJ-45 |
Product name | SKU | Minimum software required (JL563A) | Comments |
---|---|---|---|
Aruba 6200 Switch Series | All models | 10.04.1000 | JL563A does not support 1G operation; only 10G. |
Aruba 6300 Switch Series | All models M and F | 10.04.0001 | JL563A can be used in all SFP+ or SFP56 ports; no quantity limit.
JL563A does not support 1G operation; only 10G. |
Aruba 6400 Modules | R0X39B, R0X40B
R0X41A, R0X42A, R0X43A |
10.04.1000 | R0X39A/R0X40A (revision A) are no longer supported for use in the 6400 series JL563A can be used in all SFP+ , SFP28, or SFP56 ports; no quantity limit. JL563A does not support 1G operation; only 10G. |
R0X44A | 10.04.2000 | ||
Aruba 8320 48p 10G SFP/SFP+ and 6p 40G QSFP+ Switch | JL479A | 10.01.0011 | JL563A does not support 1G operation; only 10G. It is only supported in ports 1 – 12. A maximum of 12 JL563A transceivers can be used in a switch. |
Aruba 8325 48Y8C | JL624A , JL625A | 10.03.0030 | JL563A does not support 1G operation; only 10G. A maximum of 12 JL563A transceivers can be used in a switch. It is only supported in the top two rows, ports 1 - 17. It is disallowed in ports 3, 6, 9, 12, and 15. Use in any other port generates an incompatible interface error (meaning the port does not support the use of this transceiver; move to another port. The 8325 requires configuration of "interface groups" to enable use of 1G or 10G transceivers or DACs in the SFP28 ports (default is to use 25G transceivers / DACs). See the Installation Guide for details. |
Aruba 8400X Modules | JL363A
JL687A |
10.00.0018
10.04.2000 |
JL563A does not support 1G operation; only 10G. It is only supported in ports 1 - 12. A maximum of 12 JL563A transceivers can be used in the JL363A module. The JL687A 32p 25G module can support the use of the JL563A transceiver in all 32 ports. The JL687A module requires configuration of "interface groups" (groups of 4 ports) to enable the use of 1G or 10G transceivers / DACs in the SFP28 ports (default is to use 25G transceivers / DACs). See the Installation Guide for details. |