Connecting to the console port
Prerequisites
- A switch installed as described in its hardware installation guide.
- A computer with terminal emulation software.
Procedure
-
Connect the USB-C port on the switch to the USB-C port on the computer using a USB-C cable.
-
Start the terminal emulation software on the computer and configure a new session with the following settings:
- Speed: 115200 bps
- Data bits: 8
- Stop bits: 1
- Parity: None
- Flow control: None
-
Start the terminal emulation session.
-
Press
Enter once. If the connection is successful, you are prompted to login.