show lldp local-device
Syntax
show lldp local-device [vsx-peer]Description
Shows global LLDP information advertised by the switch, as well as port-based data. If VLANs are configured on any active interfaces, the VLAN ID is only shown for trunk native or untagged VLAN IDs on access interfaces.
Command context
Manager (#)
Parameters
[vsx-peer]Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.
Authority
Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.
Example
Showing global LLDP information only (all ports are administratively down):
switch# show lldp local-device Global Data --------------- Chassis-ID : 1c:98:ec:e3:45:00 System Name : switch System Description : Aruba JL375A 8400 0.1.0 Management Address : 192.168.10.1 Capabilities Available : Bridge, Router Capabilities Enabled : Bridge, Router TTL : 120
Showing all ports except 1/1/11 as administratively down:
switch# show lldp local-device Global Data --------------- Chassis-ID : 1c:98:ec:e3:45:00 System Name : switch System Description : Aruba JL375A 8400 0.1.0 Management Address : 192.168.10.1 Capabilities Available : Bridge, Router Capabilities Enabled : Bridge, Router TTL : 120 Port Based Data ---------------- Port-ID : 1/1/11 Port-Description : "1/1/11" Port VLAN ID :
In this example, all the ports except 1/1/11 are administratively down, and VLAN ID 100 is configured on this access interface.
switch# show lldp local-device Global Data --------------- Chassis-ID : 1c:98:ec:e3:45:00 System Name : switch System Description : Aruba JL375A 8400 0.1.0 Management Address : 192.168.10.1 Capabilities Available : Bridge, Router Capabilities Enabled : Bridge, Router TTL : 120 Port Based Data ---------------- Port-ID : 1/1/11 Port-Description : "1/1/11" Port VLAN ID : 100