show copp-policy
Syntax
show copp-policy [<NAME> | default] [commands] [configuration] [vsx-peer]
Description
Shows CoPP policy settings for a specific CoPP policy. When entered without specifying either a name or the
default
parameter, shows all the CoPP policy settings that are active on the switch and have successfully been programmed into the hardware.
A warning is displayed if:
The active and user-specified applications of a policy do not match.
The active and user-specified configurations of a policy do not match.
Command context
Operator (>
) or Manager (#
)
Parameters
<NAME>
Specifies the name of the policy for which to display settings. Length: 1 to 64 characters.
default
Displays CoPP settings for the default policy.
commands
Displays output as CLI commands.
configuration
Displays user-specified CoPP settings and not the active settings.
[vsx-peer]
Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.
Authority
Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.
Example
Displaying the CoPP policies defined in the configuration and the active application:
switch# show copp-policy applied copp_policy_name ------- ---------------- My_CoppPolicy applied default switch#
Displaying the active configuration of all CoPP policies as CLI commands:
switch# show copp-policy commands copp-policy My_CoppPolicy class igmp priority 6 rate 5000 burst 60 class lacp priority 2 rate 2000 burst 2050 default-class priority 1 rate 6000 burst 70 copp-policy default class acl-logging priority 0 rate 25 burst 3 class arp-broadcast priority 2 rate 1250 burst 1250 class arp-protect priority 2 rate 2075 burst 2075 class arp-unicast priority 3 rate 825 burst 825 class bfd-control priority 5 rate 850 burst 850 <--OUTPUT OMITTED FOR BREVITY--> default-class priority 2 rate 4225 burst 528 apply copp-policy default switch#
Displaying the
default
policy:
switch# show copp-policy default class drop priority rate pps burst pkts hardware rate pps --------------------- ---- -------- -------- ---------- ----------------- acl-logging 0 25 3 25 arp-broadcast 2 1250 1250 1250 arp-protect 2 2075 2075 2075 arp-unicast 3 825 825 825 bfd-control 5 850 850 850 <--OUTPUT OMITTED FOR BREVITY--> default 2 4225 528 4225