`show ip pim rp-candidate`

Syntax

show ip pim rp-candidate [all-vrfs | vrf <VRF-NAME>] [vsx-peer]

Description

Shows the candidate RP operational and configuration information. Optionally, you can specify display information by VRF. If no options are specified, it shows information for the default VRF.

Command context

Operator (>) or Manager (#)

Parameters

all-vrfs: Selects all VRFs.
vrf <VRF-NAME>: Specifies the name of a VRF. Default: default.
[vsx-peer]: Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Example

Showing PIM RP candidate:

switch# show ip pim rp-candidate all-vrfs

 Status and Counters- PIM-SM Candidate-RP Information

 VRF                     : Green
 C-RP Admin Status       : This system is a Candidate-RP
 C-RP Address            : 10.1.1.27
 C-RP Hold Time          : 150
 C-RP Advertise Period   : 60
 C-RP Priority           : 192
 C-RP Source IP Interface : Vlan10

 Group Address   Group Mask
 --------------- ---------------
 239.10.10.240   255.255.255.252
 236.0.0.0       255.255.255.0

 VRF                     : Red
 C-RP Admin Status       : This system is a Candidate-RP
 C-RP Address            : 20.1.1.27
 C-RP Hold Time          : 150
 C-RP Advertise Period   : 60
 C-RP Priority           : 192
 C-RP Source IP Interface : Vlan20

 Group Address   Group Mask
 --------------- ---------------
 239.10.10.240   255.255.255.252
 236.0.0.0       255.255.255.0