show ipv6 pim6 rpf-override

Description

Shows the RPF override configuration, which can be useful information when troubleshooting potential RPF misconfigurations. Optionally, you can specify display information by VRF. If no options are specified, it shows information for the default VRF

Command context

Operator (>) or Manager (#)

Parameters

all-vrfs

Shows information for all VRFs.

vrf <VRF-NAME>

Specifies the name of a VRF. Default: default.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Example

Showing PIM RPF override:

switch# show ipv6 pim6 rpf-override all-vrfs

VRF : Green
Static RPF Override
Multicast Source : 2003::1/128
RPF IPv6 Address : 2001::01
Multicast Source : 2005::1/128
RPF IPv6 Address : 2007::01
VRF : Red
Static RPF Override
Multicast Source : 2004::02/128
RPF IPv6 Address : 2002::02