`show ip pim interface`

Syntax

show ip pim interface [all-vrfs | vrf <VRF-NAME>] [vsx-peer]

Description

Shows the information about PIM interfaces currently configured in the router. Optionally, you can specify display information by VRF. If no options are specified, it shows information for the default VRF.

Command context

Operator (>) or Manager (#)

Parameters

all-vrfs: Selects all VRFs.
vrf <VRF-NAME>: Specifies the name of a VRF. Default: default.
[vsx-peer]: Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Example

Showing PIM interface:

switch# show ip pim interface

PIM Interfaces

VRF: default       

Interface          IP Address         mode  
------------------ -----------------  ----------
1/1/1              40.0.0.4/24        sparse
1/1/2              50.0.0.4/24        sparse