show ipv6 mld [interface <intf-id> | vlan <vlan-id>] [counters]]
Syntax
show ipv6 mld [interface <intf-id> | vlan <vlan-id>] [counters]]
Description
This command shows MLD query packet Tx and Rx on a specific VLAN.
Command context
Manager (#
)
Parameters
vlan-id
Required: 1-4094, shows MLD configuration on a specified VLAN.
intf-id
Required: IFNAME, shows MLD configuration on a specified interface.
counters
Optional: Shows MLD query packet counter Tx-Rx on a specified VLAN.
Authority
Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.
Example
switch# show ipv6 mld interface vlan 2 counters
MLD Counters
Interface Name : vlan2
VRF Name : default
Membership Timeout : 0
Rx Tx
------------- -------------
V1 All Hosts Queries 0 0
V2 All Hosts Queries 0 0
V1 Group Specific Queries 0 0
V2 Group Specific Queries 0 2
Group And Source Specific Queries 0 2
V2 Member Reports 0 N/A
V1 Member Reports 0 N/A
V1 Member Leaves 0 N/A
Packets dropped by ACL 0 N/A
switch# show ipv6 mld interface 1/1/1 counters
MLD Counters
Interface Name : 1/1/1
VRF Name : default
Membership Timeout : 0
Rx Tx
------------- -------------
V1 All Hosts Queries 0 0
V2 All Hosts Queries 0 0
V1 Group Specific Queries 0 0
V2 Group Specific Queries 0 0
Group And Source Specific Queries 0 0
V2 Member Reports 0 N/A
V1 Member Reports 0 N/A
V1 Member Leaves 0 N/A
Packets dropped by ACL 0 N/A