`show ip pim neighbor`

Syntax

show ip pim neighbor [<IP-ADDR>] 
     [all-vrfs | vrf <VRF-NAME>] [vsx-peer]

Description

Shows PIM neighbor information. Optionally, you can specify display information by VRF. If no options are specified, it shows information for the default VRF.

Parameters

all-vrfs: Selects all VRFs.
vrf <VRF-NAME>: Specifies the name of a VRF. Default: default.
[vsx-peer]: Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Example

Showing PIM neighbor information:

switch# show ip pim neighbor

PIM Neighbor

VRF                 : default
IP Address          : 40.0.0.44
Interface           : 1/1/1
Up Time (sec)       : 544
Expire Time (sec)   : 80
DR Priority         : 40