show ipv6 pim6 bsr local

Description

Shows the information about BSR candidates on the local router and multicast groups it supports. Optionally, you can specify display information by VRF. If no options are specified, it shows information for the default VRF.

Command context

Operator (>) or Manager (#)

Parameters

all-vrfs

Shows information for all VRFs.

vrf <VRF-NAME>

Specifies the name of a VRF. Default: default.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Example

Showing local Candidate BSR:

switch# show ipv6 pim6 bsr local all-vrfs

Status and Counters - PIM-SM(IPv6) Local Candidate-BSR Information

VRF                       : blu
C-BSR Admin Status        : This system is a Candidate-BSR
C-BSR Address             : 2007::01
C-BSR Priority            : 40
C-BSR Hash Mask Length    : 36
C-BSR Message Interval    : 50
C-BSR Source IP Interface : lag1

VRF                       : default
C-BSR Admin Status        : This system is a Candidate-BSR
C-BSR Address             : 2001::01
C-BSR Priority            : 40
C-BSR Hash Mask Length    : 36
C-BSR Message Interval    : 50
C-BSR Source IP Interface : 1/1/1