show ip pim bsr elected

Description

Shows information about the elected BSR in the domain and multicast groups it supports. Optionally you can specify display information by VRF. If no options are specified, it shows information for the default VRF.

Command context

Operator (>) or Manager (#)

Parameters

all-vrfs

Selects all VRFs.

vrf <VRF-NAME>

Specifies the name of a VRF. Default: default.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Example

Showing PIM elected bootstrap router information:

switch# show ip pim bsr elected all-vrfs

Status and Counters- PIM-SM Elected Bootstrap Router Information

VRF                       : default
E-BSR Address             : 10.0.0.1
E-BSR Priority            : 0
E-BSR Hash Mask Length    : 30
E-BSR Up Time             : 3000 secs
Next Bootstrap Message    : 80 secs

VRF                       : green
E-BSR Address             : 20.0.0.1
E-BSR Priority            : 0
E-BSR Hash Mask Length    : 30
E-BSR Up Time             : 3000 secs
Next Bootstrap Message    : 80 secs