`show ip igmp interface counters`

Syntax

show ip igmp interface {<INTF-ID> | vlan <VLAN-ID>} counters [vsx-peer]

Description

Shows IGMP counter details for a specific interface or VLAN interface.

Command context

Operator (>) or Manager (#)

Parameters

<INTF-ID>: Specifies an interface (such as 1/1/2).
vlan <VLAN-ID>: Specifies a VLAN. Values: 1-4094.
[vsx-peer]: Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Examples

Showing IGMP counters for interface VLAN 2:

switch# show ip igmp interface vlan 2 counters

IGMP Counters

Interface Name      : vlan2
VRF Name            : default
Membership Timeout  : 0
                                             Rx            Tx
                                             ------------- -------------
V1 All Hosts Queries                         0             0
V2 All Hosts Queries                         0             0
V3 All Hosts Queries                         0             29
V2 Group Specific Queries                    0             0
V3 Group Specific Queries                    0             2
Group And Source Specific Queries            0             2
V3 Member Reports                            0             N/A
V2 Member Reports                            0             N/A
V1 Member Reports                            0             N/A
V2 Member Leaves                             0             N/A
Packets dropped by ACL                       0             N/A