show ip pim interface <INTERFACE-NAME> counters
Syntax
show ip pim interface <INTERFACE-NAME> counters [vsx-peer]
Description
Shows the PIM packet counters information for the specified interface.
Command context
Operator (>
) or Manager (#
)
Parameters
<INTERFACE-NAME>
Specifies the interface to show packet counter information.
[vsx-peer]
Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.
Authority
Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.
Usage
Loopback interfaces are special interfaces where only unicast PIM messages are updated. This includes Register, Register Stop, and Candidate RP Advertisements.
When a loopback interface is configured as the RP, the ACL drop counters will be updated on the interface on which the packets are received.
Example
Showing PIM packet counters:
switch# show ip pim interface vlan1 counters Interface : vlan1 VRF : default Rx Counters : Hello 4 State Refresh 0 Join/Prune 1 RPadv 0 Graft 0 GraftAck 0 Assert 0 Bsm 0 Register 0 Register Stop 0 Register Drops(Register ACL hitcount) 10 Join/Prune Drops(RP ACL hitcount) 5 Tx Counters : Hello 9 State Refresh 0 Join/Prune 0 RPadv 0 Graft 0 GraftAck 0 Assert 0 Bsm 0 Register 0 Register Stop 0 Invalid Rx Counters : Hello 0 State Refresh 0 Join/Prune 0 RPadv 0 Graft 0 GraftAck 0 Assert 0 Bsm 0