`show ip igmp interface`

Syntax

show ip igmp interface {<INTF-ID>|vlan <VLAN-ID>} [vsx-peer]

Description

Shows IGMP configuration information for a specific interface (VLAN, port or LAG).

Command context

Operator (>) or Manager (#)

Parameters

<INTF-ID>: Specifies an interface (such as 1/1/2 or LAG10).
vlan <VLAN-ID>: Specifies a VLAN. Values: 1-4094.
[vsx-peer]: Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Examples

Showing IGMP configuration information for interface VLAN 2:

switch# show ip igmp interface vlan 2

IGMP Configured Version  : 3
IGMP Operating Version   : 3
Querier State            : Querier
Querier IP [this switch] : 20.1.1.1
Querier Uptime           : 1m 46s
Querier Expiration Time  : 0m 1s
Snoop Enabled on VLAN    : True