show ipv6 source-binding


show ipv6 source-binding [vsx-peer]


Shows all IPv6 static source binding information irrespective of source lockdown configuration.

Command context

Operator (>) or Manager (#)



Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.


Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.


On the 6400 Switch Series, interface identification differs.

Showing all IPv6 source binding information:

switch# show ipv6 source-binding

 PORT            VLAN            MAC-ADDRESS        HW-STATUS  FROM      IPv6-ADDRESS     
 --------------  --------------  -----------------  ---------  --------  ---------------
 1/1/1           1234            00:50:56:96:e4:cf  --         static    3000::1          
 1/1/1           1               00:50:56:96:04:4d  --         static    3000::2      
 1/1/24          1               00:01:01:00:00:01  Yes        static    1001::1