default-router

Description

Defines up to four default routers for the current DHCPv4 server pool.

The no form of this command removes the specified default routers from the pool.

Command context

config-dhcp-server-pool

Parameters

<IPV4-ADDR-LIST>

Specifies the IP addresses of the default routers in IPv4 format (x.x.x.x), where x is a decimal number from 0 to 255. You can remove leading zeros. For example, the address 192.169.005.100 becomes 192.168.5.100. Separate addresses with a space. A maximum of four IP addresses can be defined.

Authority

Administrators or local user group members with execution rights for this command.

Example

Defines two default routers, 10.0.0.1 and 10.0.0.10, for the server pool primary-pool on VRF primary.

switch(config)# dhcp-server vrf primary
switch(config-dhcp-server)# pool primary-pool
switch(config-dhcp-server-pool)# default-router ip 10.0.0.1 10.0.0.10

Deletes the default router 10.0.0.1 from the server pool primary-pool on VRF primary.

switch(config)# dhcp-server vrf primary
switch(config-dhcp-server)# pool primary-pool
switch(config-dhcp-server-pool)# no default-router ip 10.0.0.1