show dhcpv4-snooping binding


show dhcpv4-snooping binding [vsx-peer]


Shows the DHCPv4 snooping binding configuration.

Command context

Operator (>) or Manager (#)



Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.


Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.


On the 6400 Switch Series, interface identification differs.

Showing the DHCPv4 snooping binding configuration:

switch(config)# show dhcpv4-snooping binding

  MacAddress         IP               VLAN  Interface  Time-Left
  -----------------  ---------------  ----  ---------  ---------
  aa:b1:c1:dd:ee:ff         1     1/1/2      582
  aa:b2:c2:dd:ee:ff         1     1/1/2      584