ipv6 address autoconfig


ipv6 address autoconfig
no ipv6 address autoconfig


Enables the interface to automatically obtain an IPv6 address using router advertisement information and the EUI-64 identifier.

The no form of this command disables address auto-configuration.

  • A maximum of 15 autoconfigured addresses are supported.
  • This command automatically creates an IPv6 link-local address on the interface. However, it does not add the ipv6 address link-local command to the running configuration. If you remove the IPv6 address, the link-local address is also removed. To maintain the link-local address, you must manually execute the ipv6 address link-local command.

Command context



Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.


The IPv6 SLAAC feature lets the router obtain the IPv6 address for the interface it is configured through the SLAAC method. This feature is not available on the mgmt VRF.


Enabling unicast autoconfiguring:

switch(config)# interface 1/1/1
switch(config-if)# ipv6 address autoconfig

Disabling unicast autoconfiguring:

switch(config)# interface 1/1/1
switch(config-if)# no ipv6 address autoconfig