show dhcp-relay bootp-gateway
Syntax
show dhcp-relay bootp-gateway [interface <INTERFACE-NAME>] [vsx-peer]
Description
Shows the bootp gateway defined for all interfaces or a specific interface.
Command context
Manager (#)
Parameters
<INTERFACE-NAME>
Specifies an interface. Format:
member/slot/port
.[vsx-peer]
Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.
Authority
Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.
Examples
On the 6400 Switch Series, interface identification differs.
switch# show dhcp-relay bootp-gateway BOOTP Gateway Entries Interface Source IP -------------------- --------------- 1/1/1 1.1.1.1 1/1/2 1.1.1.2
switch# show ip helper-address interface 1/1/1 BOOTP Gateway Entries Interface Source IP -------------------- --------------- 1/1/1 1.1.1.1