`show ipv4 source-binding`

Syntax

show ipv4 source-binding [vsx-peer]

Description

Shows all IPv4 static source binding information irrespective of source lockdown configuration..

Command context

Operator (>) or Manager (#)

Parameters

[vsx-peer]: Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Examples

On the 6400 Switch Series, interface identification differs.

Showing all IPv4 source binding information:

switch# show ipv4 source-binding
 
  PORT            VLAN            MAC-ADDRESS        HW-STATUS  FROM      IPv4-ADDRESS
  --------------  --------------  -----------------  ---------  --------  ---------------
  1/1/1           2               aa:bb:cc:dd:ee:ff  Yes        static    1.2.3.4
  1/1/2           12              aa:ab:cc:dd:ee:ff  Yes        static    10.20.30.40