bfd <IPV4-ADDR>

Syntax

bfd <IPV4-ADDR>

no bfd <IPV4-ADDR>

Description

Enables BFD under VRRP for the specified IP address. BFD is asynchronous and echo mode is supported.

The no form of this command disables BFD under VRRP for the specified IP address.

Command context

config-if-vrrp

Parameters

<IPV4-ADDR>

Specifies the address on which to enable BFD in IPv4 format (x.x.x.x), where x is a decimal number from 0 to 255.

Authority

Administrators or local user group members with execution rights for this command.

Examples

On the 6400 Switch Series, interface identification differs.

Enabling BFD on the address 10.0.0.1 on VRRP 1: 

switch(config)# interface 1/1/1
switch(config-if)# routing
switch(config-if)# vrrp 1 address-family ipv4
switch(config-if-vrrp)# bfd 10.0.0.1

Disabling BFD on the address 10.0.0.1 on VRRP 1: 

switch(config)# interface 1/1/1
switch(config-if)# routing
switch(config-if)# vrrp 1 address-family ipv4
switch(config-if-vrrp)# no bfd 10.0.0.1