show mac-address-table
Syntax
show mac-address-table [hsc] [vsx-peer]Description
Shows MAC address table information. If HSC is enabled, MAC addresses discovered by the HSC manager are also displayed.
Command context
Operator (>) or Manager (#)
Parameters
[hsc]- Displays only MAC address discovered by the HSC manager on the remote controller.
[vsx-peer]Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.
Authority
Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.
Examples
Showing output when table entries exist:
switch# show mac-address-table MAC age-time : 300 seconds Number of MAC addresses : 5 MAC Address VLAN Type Port -------------------------------------------------- 00:00:00:00:00:05 1 dynamic 1/1/2 00:00:00:00:00:06 2 dynamic 1/1/1 00:00:00:00:00:08 3 hsc vxlan1(10.1.1.1) 00:00:00:00:00:12 3 hsc vxlan1(10.1.1.3) 00:00:00:00:00:34 3 hsc vxlan1(10.1.1.4)
Showing output when there are no MAC table entries:
switch# show mac-address-table No MAC entries found.
Showing only MAC address discovered by the HSC manager:
switch# show mac-address-table hsc Number of MAC addresses : 3 MAC Address VLAN Type Port --------------------------------------------------------- 00:00:00:00:00:08 3 hsc vxlan1(10.1.1.1) 00:00:00:00:00:12 3 hsc vxlan1(10.1.1.3) 00:00:00:00:00:34 3 hsc vxlan1(10.1.1.4)