show mac-address-table port

Description

Shows the MAC address table entries for the specified port.

Command context

Operator (>) or Manager (#)

Parameters

<PORT-NUM>

Specifies a physical port on the switch. Use the format member/slot/port (for example, 1/3/1).

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Examples

Showing the MAC address table entries for port 1/1/1:

switch# show mac-address-table port 1/1/1
MAC age-time            : 300 seconds
Number of MAC addresses : 1

MAC Address          VLAN     Type       Port
--------------------------------------------------
00:00:00:00:00:01    2        dynamic    1/1/1