`show ip interface`

Syntax

show ip interface <IFNAME>

Description

Displays the status of IP Neighbor Flood on the specified interface along with other interface-related attributes.

Command context

Operator (>) or Manager (#)

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Parameters

<IFNAME>: Specifies the interface name (for example, vlan30). Optional.

Examples

switch# show ip interface vlan30

Interface vlan30 is up
 Admin state is up
 Hardware: Ethernet, MAC Address: 94:f1:28:21:63:00
 IP MTU 1500
 IP Neighbor Flood is Enabled
 IPv4 address 192.168.3.1/24
 L3 Counters: Rx Disabled, Tx Disabled