`show ip interface`

Syntax

show ip interface <INTERFACE-NAME>

Description

Displays the status of IP Directed Broadcast on the specified interface along with other interface related attributes.

Command context

Operator (>) or Manager (#)

Parameters

<INTERFACE-NAME>: Specifies the interface to use as a source for displaying the status of the IP Directed Broadcast.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Examples

Displaying the IP Directed Broadcast status on the specified interface:

switch# show ip interface vlan30


Interface vlan30 is up
 Admin state is up
 Hardware: Ethernet, MAC Address: 94:f1:28:21:63:00
 IP MTU 1500
 IP Directed Broadcast is Enabled
 IPv4 address 192.168.3.1/24
 L3 Counters: Rx Disabled, Tx Disabled