An example of the OSPFv2 information in the show running-config command

switch# show running-config
Current configuration:
!
!Version ArubaOS-CX 10.0X.XXXX
!
lldp enable
timezone set utc
vrf red
mgmt
led base-loc_fdc on
led base-loc on
led base-hlth_fdc fast_blink
led base-pwr_fdc on
!
!
!
!
!
!
aaa authentication login default local
aaa authorization commands default none
!
!
!
!
router ospf 1 vrf vrf_default
    area 0.0.0.0
    area 0.0.0.1
    area 0.0.0.1 virtual-link 55.4.4.4
        hello-interval 15
        dead-interval 60
router ospf 1 vrf red
    area 0.0.0.4
    area 0.0.0.5
    area 0.0.0.5 range 10.1.0.0/16 type inter-area
vlan 1
    no shutdown
interface lag 44
    no shutdown
    ip address 33.1.1.1/24
    ip ospf 1 area 0.0.0.0
    ip ospf hello-interval 22
interface 1/1/1
    no shutdown
    ip address 33.44.1.1/24
    ip ospf 1 area 0.0.0.0
    ip ospf passive
    ip ospf dead-interval 88
    ip ospf transit-delay 44
    ip ospf priority 88
    ip ospf cost 8
    ip ospf network point-to-point
    ip ospf authentication simple-text
    ip ospf authentication-key kkk
    ip ospf shutdown
interface 1/1/2
interface loopback 2
    ip address 55.55.55.55/32
    ip ospf 1 area 0.0.0.0